FoxyTag

Hi,

I installed your nifty tool on my Nokia, model 6110 Navigator. The test mode shows up fine, I see speed etc.
But now I wanted to participate, so I sms the phone number and entered my details on the internet site. I received a mail with my user name and password.

But I can't enter the options menu on my phone, so I can't enter my user name and password to really start working with it. (It just looks like the options button doesn't work)

Did I forget a step? I tried reinstalling the tool, but the test mode keeps returning...

Strange.

There are lots of other user that could enter their username/password (saw it in the log).

Navigator users, someone an idea???

hi!

I found a workaround for this, with a bit of luck. I can enter the menu when I press the '0' (zero) first, en then the options button, easy as that.
After that I could logon and enjoy this awsome tool!!

I hope this workaround can be usefull for others as well.

regards,

Ron.

Very very very very strange...

Well, if it works now...

But... since you like this tools, you probably use it often.
Could you please also answer to a few questions?

- Which parameters do you use for "Flash delay" and "Flash duration" ?
- With these parameters, is you screen on (lighted), and behaving correctly?
- If you put (0, 0), what happens? Does you screen go off? Does the application still running and warning you when you approach a speed camera?
- If you answered (0, 0) for the first question, which parameters can you set in order that your screen stay on and behaves correctly (not starts flashing after a while, or whatever)?
- What about the alarm; is it possible to set the volume of it? If yes, how?

Thank you very much in advance.

I'm also a 6110 Navigator owner, and I can give you my experiences:
- Sometimes foxytag doesn't start at all
- Sometimes foxytag won't start with a "not enough memory" message (especially if I have other programs running, like a webbrowser or the navigation program)
- if foxytag can't get a fix, sometimes I can't access the menu
- I can't find a proper "flash delay" and "flash duration" that works well
- putting (0,0) will give the following result: the backlight will turn off after a few seconds.
- alarm volume: no idea how to change this, even though it is rather loud

Other than that, I still like the tool.
When on the road, I usually have three apps running: my navigation tool, my gps tracker and foxytag. But I have to start foxytag first, otherwise it tells the phone it needs more memory. I think this is false, because it obviously doesn't need all that memory it wants, since I can start and run the other two apps fine after starting up foxytag. Then again, sometimes foxytag will just disappear after I started the other apps.

Oh, I believe that the screen and foxytag freezes if the backlight turns off, until you touch a key. I'll have to check that though.

Thank you very much for your information.

Developing a single soft that runs on different devices is not an easy task. But precise comments like this really help to improve the software. Some answers:

Jelle wrote:- I can't find a proper "flash delay" and "flash duration" that works well

Try (1, 999999999)

Jelle wrote:- putting (0,0) will give the following result: the backlight will turn off after a few seconds.

You should be able to avoid that with http://www.outbank.de/index.php?id=29&L=1

Jelle wrote:- alarm volume: no idea how to change this, even though it is rather loud

OK. I'll put a volume parameter in the next version.

Please visit http://www.foxytag.com/forum/viewtopic.php?t=407

@Jelle: Added the volume parameter. See http://www.foxytag.com/forum/viewtopic.php?t=410

Foxy wrote:Very very very very strange...

Well, if it works now...

But... since you like this tools, you probably use it often.
Could you please also answer to a few questions?

- Which parameters do you use for "Flash delay" and "Flash duration" ?

(0,0)

- With these parameters, is you screen on (lighted), and behaving correctly?

- If you put (0, 0), what happens? Does you screen go off? Does the application still running and warning you when you approach a speed camera?

I have 0,0 there, and the screen backlight goes off.

- If you answered (0, 0) for the first question, which parameters can you set in order that your screen stay on and behaves correctly (not starts flashing after a while, or whatever)?

I should try and experiment with that for a while I will let you know.

- What about the alarm; is it possible to set the volume of it? If yes, how? .

I can't set the volume still, but I saw in the thread that you created a new version?

Thank you very much, again. And sorry for the late reply.