FoxyTag

Hi!

Is this right?

red dot: "fix Radar"
red dot + white: "Phantom-Radar"
red dot + black: "mobile Radar"

If I tag an mobil radar once, which is every few days on the same place, shoud I always tag and remove it, if there is a wrong information, like: there is only an "Phantom-Radar" but the "mobile Radar" is there an active --> should I tag it with '2' every time?
or
there is the symbol for the active "mobile Radar" and the "phantom-Radar" but the Radar is gone, shoud I remove the "mobile Radar" tag every time?

http://www.foxytag.com/rel/current/bt/UsersGuide.pdf
and
http://www.foxytag.com/en/faq.html

should answer your questions.

no, I have read the manual and the faq and there are no answers.

please answer my questions, thx

"The circles in the main screen indicate the distance. The
radius of the biggest one is defined in the parameters, the
radius of the second one worth 2/3 of the first one, and the
radius of the third one worth 1/3 of the first one. The
smallest circle has a radius of 75 meters. When you press
"0" (ask to delete a tag), only the tags where the center is
inside this 75-meter circle are concerned. A fixed speed
camera is represented by a red circle, a mobile speed
camera by a red circle with a black point, and a ghost by a
red circle with a white point" (User's guide)

For the last question, just press 2 when you see a mobile SC (you do not need to remove it). The corresponding ghost will then now that this area is "dangerous" and therefore it will stay longer active.

thank you!!!!

in the german manual, is no part with the symbols...

Oops

I'll have a talk with our German translator...

Thank you for having mentioned this problem.